Identification Of Instructions In The Operating Manual; Structure Of Safety Instructions - GEA durietta I Bloc Installation And Operating Instructions Manual

Safety
2.3 Identification of instructions in
the operating manual
Don't remove instructions from machine

2.3.1 Structure of safety instructions

BA.017.BYY.001.01.10.GB
The safety instructions presented in this operating manual are
Symbol
identified as shown below.
Fig. 1 Symbol for safety instructions
In order to classify the safety labels they are distinguished by
Signal words
the following signal words:
•
•
•
Instructions attached directly to the machine, such as rota-
tional direction arrow must be noted and kept in completely
legible condition.
Damaged or illegible instructions must be replaced.
W arn in g
Description of danger!
!
Example:
Da nger
Electrical shock if electrical parts are touched!
!
A B
A: Failure to follow these safety instructions can endanger per-
sonnel.
B: Safety instructions which involve warnings against electrical
voltage.
C: Failure to follow these safety instructions can endanger the
machine and its operation.
Danger
Characterises an imminent hazard with a high risk which
can cause death or grievous bodily harm.
Warning
Characterises a possible hazard with medium risk which
can cause death or bodily harm if it is not avoided.
Caution
Characterises a hazard with minor risk which can causes
minor or medium bodily harm if it is not avoided.
Possible consequence.
Action to eliminate the danger.
Death, serious bodily injury, damage to property.
Before attempting to diagnose any fault, make sure that
the main switch has been switched off. It must be ensured
that the electricity supply cannot be accidentally switched
on.
ATTENTION
C
7