Unauthorized Modifications And Production Of Spare Parts; Improper Operation - GEA durietta I Bloc Installation And Operating Instructions Manual

Table of Contents

Advertisement

Safety
2.8 Unauthorized modifications
and production of spare parts

2.9 Improper operation

BA.017.BYY.001.01.10.GB
W arn in g
Contact with hazard substances (e. g. inhale)!
!
Ca ution
Tripping hazard from electric power cable!
!
W arn in g
Electrical hazard!
No modifications or changes to the machine may be made
without written approval of the manufacturer. In the interest of
safety, only original spare parts and accessories authorized
by the manufacturer may be used. The use of other parts can
exempt the manufacturer from liability for damage which may
thus be caused.
The operational reliability of the delivered machine can be
guaranteed only when it is used properly as indicated in the
following sections.
The given limit values may not be exceeded under any cir-
cumstances.
Death, serious bodily injury, damage to property.
Drain away leakage of hazardous pumping media in such
a way that there is no danger to personnel or to the envi-
ronment.
Follow legal regulations.
If shaft seal fails switch off the pump. Replace seal before
next start-up.
Death, serious bodily injury.
Route the electric power cable in such a way that no one
can trip over it (in case of portable pumps).
Death, serious bodily injury.
Only use acceptable electric cables and plugs.
9

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the durietta I Bloc and is the answer not in the manual?

Table of Contents