Qualifications And Training Of Personnel; Hazards Caused By Failure To Follow The Safety Instructions; Safety-Conscious Work; Safety Instructions For The Operator / User - GEA durietta I Bloc Installation And Operating Instructions Manual

2.4 Qualifications and training of
personnel
2.5 Hazards caused by failure to
follow the safety instructions

2.6 Safety-conscious work

2.7 Safety instructions for the
operator / user
8
The employees operating, maintaining, inspecting, and in-
stalling the pump must have the appropriate qualifications for
this work. The operator must define in detail the tasks for
which the employees are responsible, the tasks of which they
are in charge, and the manner in which they are supervised.
If the employees do not have the necessary knowledge, they
must be instructed and trained accordingly. This can be done,
if necessary, by the manufacturer/supplier under contract to
the operator. The operator must also guarantee that the em-
ployees fully understand the contents of the operating manu-
al.
If these safety instructions are not followed employees, the
machine itself and the environment will be in danger.
Failure to follow the safety instructions can lead to the loss of
the right to file claims for damages.
Failure to follow instructions can, for example, lead in partic-
ular to the following hazards:
•
•
•
•
The safety instructions given in this operating manual, the ex-
isting national regulations for accident prevention, and any
applicable internal working, operating, and safety instructions
of the operator must be followed.
Caution
Hot or cold mechanical components!
!
War ni ng
Trapping hazard!
!
Breakdown of important functions of the machine/system
Failure of recommended methods of maintenance and
repair
Endangerment of personnel by electrical, mechanical,
and chemical hazards
Endangerment of the environment by leakage of hazard-
ous materials.
Serious bodily injury.
Take structural measures to prevent contact with them!
Death, serious bodily injury, damage to property.
Do not remove protection against contact with moving
parts (e.g. coupling guard) while the machine is operating.
Replace defective safety equipment immediately.
Safety
BA.017.BYY.001.01.10.GB