Pepperl+Fuchs PGV F200A R4-V19 Series Manual page 26

PGV...-F200/-F200A...-R4-V19
Installation
The distance between a Data Matrix position code and a Data Matrix control code must be
between 0 mm and 5 mm.
25 mm
Figure 3.19
A lane can switch from a colored tape to a Data Matrix code tape and back again as often as
required. The distance between the colored tape and the edge of the Data Matrix code must be
between 0 mm and 10 mm
Figure 3.20
The Y value does not change if the colored tape and the Data Matrix code tape are aligned.
Ensure that the center line of the colored tape and the center line of the Data Matrix code are on
a line.
26
D 25 mm D 25 mm
0 mm  D  5 mm
0 mm  D  10 mm