Pepperl+Fuchs PGV F200A R4-V19 Series Manual page 28

PGV...-F200/-F200A...-R4-V19
Installation
Data Matrix Code Tapes with a Starting Position of 0 m
Order designation
PGV10M-CA25-0
...
PGV100M-CA25-0
Table 3.1
Data Matrix control codes
Order designation
PGV-CC25-001
...
PGV-CC25-999
Caution!
Stop edges
If you attach another code tape at the end of a previous code tape, the code pattern of 20 mm
must be retained.
Note
Bends
If mounting the code tape in corners, cut the code tape several times as illustrated.
1 Bend to the left
2 Bend to the right
28
See also data sheet PGV*-CA25-* at www.pepperl-fuchs.com
Description
Code tape, length: 10 m
...
Code tape, length: 100 m
Description
Code tape, Control Code 001, length: 1 m
...
Code tape, Control Code 999, length: 1 m