Pepperl+Fuchs PGV F200A R4-V19 Series Manual page 41

PGV...-F200/-F200A...-R4-V19
Operation and communication
Warning Messages
Warning
message
WRN00
WRN01
WRN02
WRN03
WRN04
WRN05
WRN06
WRN07
WRN08
WRN09
WRN10
WRN11
WRN12
WRN13
Table 5.5
Note
16-bit/32-bit
In order for the response telegrams from the read head to be transferred in 16-bit or 32-bit
values, fill in the missing bits as follows:
1. Unsigned: Fill in the missing upper bits with "0".
2. Signed: Fill in the missing upper bits with the highest bit of the response telegram.
Should you have any questions about this, please contact Pepperl+Fuchs.
Description
Code with content not typical of PGV found
Read head too close to code tape
Read head too far from code tape
Reserved
Reserved
The read head is rotated or tipped in relation to the code tape
Low level of code contrast
Repair tape detected
Temperature too high
Position code near branch/crossover detected
More than the specified number of code lanes present
Reserved
Reserved
Reserved
If no warnings are present, the bits are set to 0.
41