Pepperl+Fuchs PGV F200A R4-V19 Series Manual page 52

PGV...-F200/-F200A...-R4-V19
Appendix
Cancel
Figure 6.3
Use
Figure 6.4
Default
Figure 6.5
52
The "CANCEL" code card discards the modified parameterization and terminates
external parameterization operating mode. The read head switches to normal mode and
adopts the last valid configuration that was saved.
The "USE" code card takes over the set configuration volatile in the read head working
memory and terminates the external parameterization operating mode. The read head
then operates with this configuration. However, if the read head is switched off and on
again, the configuration is lost and the read head operates with the last valid
configuration that was saved. This function is used primarily for test purposes.
The "DEFAULT" code card restores the settings of the read head to default and
terminates external parameterization operating mode.
Cancel
Use
Default