Certification; Summary Of Eu Declaration Of Conformity - Renishaw FORTiS-S Functional Safety Installation Manual And Safety Manual

Enclosed encoder system
Hide thumbs Also See for FORTiS-S:
Table of Contents

Advertisement

6

Certification

FORTiS-S FS encoder system
Functional Safety Certificate No. FSC003
FUNCTIONAL
Under the terms of CSA SIRA Functional Safety Certificate SIRA CASS00023/01, for the management
and self‑certification of functional safety activities up to SIL3/PLd.
Renishaw plc declares that the products listed by this installation guide meet the requirements of:
IEC 61508-1:2010, IEC 61508-2:2010 and IEC 61508-3:2010
IEC 61800-5-2:2016
ISO 13849-1:2015 and ISO 13849-2:2012
when used as an element/subsystem in safety-related systems performing safety functions requiring up to
and including:
SIL2 with HFT = 0 (1oo1)
Category 3, PLd.
6
SIL2
SAFETY
PLd
7

Summary of EU declaration of conformity

EUD2020-00525
Renishaw plc declares under its sole responsibility that the products identified below are in conformity with
the relevant Union legislation:
Product name:
FORTiS-S
Description:
FORTiS-S
Part no.:
FS1*-02, e.g. FS100B044SC36BS050X-02
Valid from:
Mod level -02
The product complies with EU directives:
2006/42/EC
Machinery directive
2014/30/EU
Electromagnetic compatibility (EMC)
2011/65/EU
On the restriction of the use of certain hazardous substances in
electrical and electronic equipment (recast)
The product complies with the following technical standards:
EN 12100:2010
Safety of machinery – General principles for design –
Risk assessment and risk reduction
EN 61326-1:2013
Electrical equipment for measurement, control, and laboratory use.
Part 1: General requirements
Immunity to Table 2 – Industrial electromagnetic environment
Emissions to Class A – Industrial electromagnetic environment
EN 13849-1:2015
Safety of machinery – Safety-related parts of control systems
Part 1: General principles for design
EN 13849-2:2012
Safety of machinery – Safety-related parts of control systems
Part 2: Validation
EN 62471:2008
Photobiological safety of lamps and lamp systems
EN 63000:2018
Technical documentation for the assessment of electrical and
electronic products with respect to the restriction of hazardous
substances
For the full declaration of conformity EUD2020-00525 see
series FS encoder system
FS encoder system that is functional safety certified
www.renishaw.com/productcompliance
Original instructions

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fortis-s fs

Table of Contents