Certification - Renishaw TONiC FS T301 Series Functional Safety Manual

Certification

TONiC FS encoder system
Functional Safety Certificate No. FSC001
Under the terms of CSA SIRA Functional Safety Certificate SIRA CASS00023/01, for the management and
self-certification of functional safety activities up to SIL3/PLd:
Renishaw plc declares that the products listed by this installation guide meet the requirements of:
BS EN IEC 61508-1:2010, BS EN IEC 61508-2:2010 and BS EN IEC 61508-3:2010
BS EN 61800-5-2:2017 (IEC 61800-5-2:2016)
BS EN ISO 13849-1:2015 and BS EN ISO 13849-2:2012
when used as an element/subsystem in safety related systems performing safety functions requiring up to
and including:
SIL2 with HFT = 0 (1oo1)
Category 3, PLd.
TONiC RSLM20/RELM20 Functional Safety installation guide and safety manual
SIL2
FUNCTIONAL
SAFETY
PLd
EU declaration of conformity
Renishaw plc declares under its sole responsibility that the products identified below are in conformity with
all relevant Union legislation.
Name
Product Name:
Description:
Part no.:
Valid from:
The products comply with EU directives:
2014/30/EU
2011/65/EU
and comply with the following technical standards:
BS EN 12100:2010
BS EN 61010-1:2010
BS EN 61326-1:2013
BS EN 62471:2008
BS EN IEC 63000:2018
The persons authorised to compile the technical file and issue the declaration of conformity are:
Steve Oakes, Director & General Manager, Encoder Products Division
Martin Curtis, Regulatory Compliance Manager, Encoder Products Division
Renishaw plc, New Mills, Wotton-under-Edge, Gloucestershire, GL12 8JR, United Kingdom
Signed: M. Curtis
Dated: 30/09/2019
Place: Wotton-under-Edge
Reference no. EUD 2019-003
Original instructions
Description
TONiC FS encoder system
TONiC optical encoder system, that is FS certified
T3xxx (Linear); T4xxx (Rotary)
Serial number 2AHF37
Serial number 2AHF79
Electromagnetic compatibility (EMC)
On the restriction of the use of certain hazardous substances
inelectrical and electronic equipment (recast)
Safety of machinery. General principles for design.
Risk assessment and risk reduction
Safety requirements for electrical equipment for measurement,
control, and laboratory use
Part 1: General requirements
Electrical equipment for measurement, control and laboratory use.
EMC requirements. General requirements
Immunity to Table 2 - Industrial electromagnetic environment
Emissions to Class A - Industrial electromagnetic environment
Photobiological safety of lamps and lamp systems
Technical documentation for the assessment of electrical and
electronic products with respect to the restriction of hazardous
substances
4