Agilent Technologies AA Series User Manual page 49

9
10 From the AA Language Installer window, select your preferred
Agilent 240/280 Series AA User's Guide
If you are using any accessories, click the Accessories tab in the
'SpectrAA Instrument Configuration' window. Select your GTA
(Graphite Tube Atomizer), Flame Autosampler and /or ETC 60
from the drop-down lists.
a
If you select GTA 120, the option for High capacity racks is
enabled. Select this option to enable support for the optional
high capacity carousel (130 x 1.1 mL samples and 5 x 10 mL
standard/modifier solutions).
b
If you select Agilent SPS 3 flame autosampler, click Edit
COM port parameters to define the COM port and the
settings to be used for communicating with the autosampler.
Refer to the SPS 3 operation manual for details of the
required communications parameters.
c
If you are installing the ETC 60 and want to control this
accessory from the SpectrAA software, click Edit COM port
parameters to define the COM port to be used to control this
accessory.
d
Click OK.
language from the drop down menu. SpectrAA uses the selected
language where possible. Where the selected language is not
available (as is the case for some of the cookbooks), English is
displayed. Select Install to continue the installation.
Installation
49