Agilent Technologies AA Series User Manual page 48

Installation
5
6
7
8
48
From the 'Choose Destination Location' window, select the drive
or sub-directory where the SpectrAA software will be installed. If
you wish to install the file in a directory other than the default
location, select Browse.
From the Select Program Folder window choose the name the
program shortcut will use on the Windows Start menu.
On the Start Copying Files window, check that all settings are
correct. Select Next to begin the installation.
From the 'SpectrAA Instrument Configuration' window, select
your instrument type from the drop down list on the
'Instrument #1' page. Then do the following:
If you are running a one instrument system:
Continue with Step 9.
If you are running an Agilent AA-DUO system (simultaneous
flame and furnace operation):
You must now set up the second instrument. To do this:
a
Select the DUO check box.
b
Select the Instrument #2 tab.
c
Select the instrument type from the drop-down list. It does
not matter which instrument is assigned to which page,
however, 'Instrument #1' must have the IEEE "9" setting and
'Instrument #2' must have the IEEE "8" setting. The IEEE
settings are configured after installing SpectrAA CFR. Take
note of which instrument is listed in 'Instrument #2'. See the
following image.
Agilent 240/280 Series AA User's Guide