Table of Contents
Advertisement
Introduction
Installation Requirements
Before you receive your instrument, you are given an Agilent AA Site
Preparation Guide; which describes the environmental and operating
requirements of the Agilent AA system. You must prepare your
laboratory according to those instructions before the Agilent AA can
be installed. You should keep the Site Preparation Guide for future
reference. If you have misplaced your copy, you can obtain a
replacement from your local Agilent office.
Agilent AA Documentation
This manual covers the installation of the Agilent SpectrAA software
for 240/280 series AA instruments. Instructions for installing,
operating and maintaining the instruments are included in the
SpectrAA Help (see Page 67).
Operating instructions for the Sample Introduction Pump System
(SIPS) and other AA accessories are given in the manuals
accompanying the accessories or in the SpectrAA Help
Conventions
The following conventions have been used throughout this manual:
30
"Tool Tips" state the allowed range for each field
Comprehensive error system
The capacity to simultaneously operate one flame and one
furnace (deuterium or Zeeman) spectrometer simultaneously
from one computer (requires SpectrAA PRO version software)
Features to assist users to achieve compliance with US FDA 21
CFR Part 11 requirements (optional CFR version only) which
currently only runs under Windows XP (Service pack 3)
Single quotes (' ') indicate a selection you can make from several
choices, such as radio buttons, checkboxes and software items.
ALL CAPITALS indicates text you must type in from the
keyboard (e.g. type SETUP at the prompt).
Agilent 240/280 Series AA User's Guide
Advertisement
Table of Contents
