Agilent Technologies AA Series User Manual page 34

Introduction
Other Electrical Connections
Rear of instrument:





WARNING Shock Hazard
High voltage– To maintain safety, only the UltrAA lamp power supplies
should be used at these connections.
Front of instrument:

WARNING Shock Hazard
To prevent connector damage, switch OFF the instrument before inserting the
plug and always turn the locknut fully clockwise to the detent position. To
maintain safety, only the Zeeman workhead connector should be used at this
connection.
34
IEEE 488
Accessory, 9-way female D-range type
Accessory, MCA, 6 way DIN type (AA280FS and AA280Z only)
USB port, optional
UltrAA lamp connections: Burndy circular 6-way, optional
(actual number depends on the model and option selected)
Zeeman workhead CPC 14 way connection behind the Left cover
(Zeeman only).
Agilent 240/280 Series AA User's Guide