Table of Contents
Advertisement
Figure 2. Logitech Webcam Drivers installation window
8
9
10 The software is now installed. Click Checkout my webcam.
11 Plug in the Logitech Webcam into the USB port on the
12 Select Quick capture and then Controls.
Agilent 240/280 Series AA User's Guide
If an 'Update' screen is displayed, click Next.
The 'Installing Software' screen will be displayed.
After the installation has completed the 'Check Settings' screen
will be displayed. Click Next.
The Logitech Webcam Software will be displayed.
spectrometer.
If installation is successful an image of a Logitech Webcam
camera will be displayed on the software window.
The image from the Tube-CAM video is not currently displayed in
the 'Webcam Control' window because the hollow cathode lamps
are not yet illuminated.
Installation
59
Advertisement
Table of Contents
