Table of Contents
Advertisement
Installing the SpectrAA CFR Software
This procedure is only for use with Windows XP SP3 systems and SpectrAA CFR
IMPORTANT
version 5.1 (27) software. If you are not using SpectrAA CFR software
version 5.1 (27), please see Page 42 for software installation instructions.
Because the CFR version is an upgrade to the base installation, the
SpectrAA Base version 5.1 (27) must be installed before any
installation of the CFR version. The operating system must be
installed before starting the SpectrAA software installation.
Installing the SpectrAA Base Software
Windows XP (SP3), with NTFS file system is required for the SpectrAA CFR
NOTE
version. Currently, SpectrAA CFR is not compatible with Windows 7.
To install the SpectrAA Base version 5.1 (27) software:
1
2
3
4
Agilent 240/280 Series AA User's Guide
Ensure that the PC is on and that no other Windows applications
are running.
Insert the SpectrAA CD into the CD ROM drive. The installation
program should start automatically. If the program does not auto
start, do the following:
a
From the Windows Start menu, select Run. The Run dialog
displays.
b
In the Run dialog, type X:\SETUP.EXE (where X represents
the letter of your CD-ROM drive) and select OK to start the
installation.
Once the installation program commences, follow the prompts,
selecting Yes, Next or OK on each page.
On the User Information window enter the user information as
requested.
Installation
47
Advertisement
Table of Contents
