Materials Handling And Storage; Printing Materials - Stratasys J826 Site Preparation Manual

Hide thumbs Also See for J826:

Table of Contents

Stratasys J826

Materials Handling and Storage

Printing materials should be stored indoors, in a dry area with adequate ventilation. The following table

lists general requirements for storage, inventory control, and disposal.

Topic

Storage

Inventory control method

Disposal

These specifications are applicable for most printing materials. Requirements for handling and storing

specific materials appear in the Material Safety Datasheet (MSDS) included with each material.

Cleaning Solvent

One liter of isopropanol (IPA) or ethanol (ethyl alcohol) should be available at all times for cleaning

purposes.

The customer is responsible for ensuring that the material storage area complies with local regulations.

DOC-18005 Rev. E

Table 7 Requirements for hazardous materials

Note:

•

Non-compliance with these recommendations might result in reduced shelf life.

•

Disposal of all liquid and solid waste, cleaning cloths, gloves, and empty material

containers must be done in accordance with local laws and regulations.

Materials Handling and Storage

Requirement

15°C to 27°C (59°F to 81°F)

First In First Out (FIFO)

In compliance with local regulations

Table of Contents