Maintenance - Bartscher Silversteam-K 6110DRS Manual

Guide Rails
Fig. 58
EN
3. Thoroughly clean the guide rail with a soft cloth.
4. When the chamber and guide rails are clean, re-insert guide rails into the
chamber and secure them with knurled screws.
7.3

Maintenance

•
Regularly (at least once a year), have an authorized and specialised personnel
verify the appliance. To this end, contact the service company.
•
Before attempting any maintenance works, disconnect the power supply, close
water supply and completely dry the appliance.
•
Before moving the appliance into a new location, disconnect power and water
supply lines, as appropriate.
•
If the appliance is part of a system equipped with rollers, check if the electrical
wiring, piping installation and hose connections have not been damaged during
moving.
•
After moving the appliance into a new location, and prior to its start-up, make
sure that all electrical and water connections have been executed following
standard regulations in force.
68 / 70
Fig. 56
Cleaning and Maintenance
To facilitate the cleaning of the thermal
processing chamber, remove guide rails
from the appliance.
1. To this end, loosen the knurled screws
(left and right) and remove guide rails
from the thermal processing chamber.
2. Clean guide rails with warm water, a soft
cloth and a mild cleaning agent.
Fig. 57
117262