Table of Contents
Advertisement
Using the Rack Control Function
Selecting Thermal Processing Program
By selecting one of the thermal
processing programs from the list — e.g.,
'Lunch–Dinner' — a screen will open with
this thermal processing program's general
settings listed to the left: Pre-Heat,
Thermal Processing Mode, Temperature,
Fan Speed, Drain Valve (Humidity or
SteamTuner if Mix or Steam mode has
been set).
And 5 empty levels will be seen to the
right.
EN
Starting Thermal Processing Program
By default, all Rack Control programs work basically with infinite time.Regardless of
whether the program includes pre-heating or not, the first thing to do is start the
program by pressing START key (22, Fig. 31).
Adding Dishes to Thermal Processing Program Levels
After starting the program and at the end of pre-heating (if present), press the '+'
symbol key (23, Fig. 31) for each of the right hand fields to add the name of the dish
to be enter for the selected level.
50 / 70
Operating Instruction
Fig. 31
117262
Advertisement
Table of Contents
