Table of Contents
Advertisement
Ventilation Filter
To ensure that the electronic components of the appliance do not exceed a safe
temperature, the ventilation filter should be cleaned regularly, at least once a
month.
The filter is located at the back of the appliance (A, Fig. 52).
1. Remove the ventilation filter (A) from the
holder, by pulling it upwards by the tab
(C).
2. Clean the ventilation filter manually with
use of water and soap. Rinse with fresh
water, and leave to dry in open air or dry
it thoroughly with a cloth.
3. Re-insert the ventilation filter in the
holder.
ATTENTION!
If the 'Hi Temp' alarm is triggered, the
probable cause is the excessive
deposition of dirt or dust on the
ventilation filter.
EN
If this is the case, the ventilation filter
must be cleaned immediately.
Fume Extractor
Through the fume extractor (B, Fig. 52), the vapour generated in the thermal
processing chamber is released. Make sure that the fume extractor is not clean,
clogged or blocked.
Appliance Door / Internal Glass Pane
Fig. 53
66 / 70
Cleaning and Maintenance
Double glazing facilitates cleaning. The
internal glass pan may be opened and
removed when required.
1. To this end, rotate clockwise both
latches (top and bottom) that hold the
internal glass pane in place.
Fig. 52
117262
Advertisement
Table of Contents
