Table of Contents
Advertisement
Operating Instruction
Fig. 13
Fig. 14
117262
Setting Relative Vapour Percentage
Only in 'Mixed' thermal processing mode is
it possible to set the percentage of
humidity that the appliance will maintain
during thermal processing.
1. To set the desired level of humidity,
press key 7 (Fig. 13) and set the value.
Setting Fan Speed
In 'Mixed' and 'Convection' thermal
processing modes you may change fan
speed parameters.
In 'Steam' thermal processing mode this
setting is automatic.
Fan motors are designed for uniform heat
distribution in the oven chamber in order to
obtain the uniform thermal processing
intensity and browning of products on
various levels.
1. To set the fan speed, press key 8
(Fig. 14) and select the desired setting.
EN
35 / 70
Advertisement
Table of Contents
