Table of Contents
Advertisement
Operating Instruction
Using Rack Control with EasyService
When using EasyService, other dishes
may be added in Rack Control
operation mode, which will be
controlled independently from those
selected for EasyService. Both
functions may be used at the same time
only when EasyService will be activated
first and then other dishes will be added
in Rack Control mode.
EasyService cannot be activated when
Rack Control is already activated.
Fig. 40
117262
Programmed Start
A thermal processing start may be
programmed beforehand by pressing
key 32 (Fig. 40).
1. Select year, month, day, hour, and
minutes on the screen and save
the setting.
Once the setting has been saved, the
appliance may not be switched off and
additional thermal processing
programs may not be started.
EN
Fig. 39
57 / 70
Advertisement
Table of Contents
