Table of Contents
Advertisement
Cleaning and Maintenance
Fig. 54
Aligning Appliance Door
Fig. 55
117262
2. Tilt the internal glass pane.
3. Clean both sides of internal glass pane
and appliance door with the use of
appropriate agents.
4. Thoroughly dry the internal glass pane
from both sides.
5. Again, close the internal glass pane or
re-insert it correctly, and lock latches in
their initial positions by turning them
counter-clockwise.
If needed, the door hinges may be adjusted
to optimize the closing and tightness of the
thermal processing chamber door seal.
Door hinges must be set in a way making it
possible to properly close the door during
operation. The top and bottom hinge may be
adjusted (Fig. 55).
1. Loosen screws (a-b, Fig. 56 and
Fig. 57).
2. Slide the door to the required position.
3. After adjustment, re-tighten screws.
EN
67 / 70
Advertisement
Table of Contents
