Table of Contents
Advertisement
Installation Instructions
5
Installation Instructions
5.1
Installation
CAUTION!
Incorrect installation, positioning, operation, maintenance or misuse of
the appliance may lead to personal injury or property damage.
Positioning and installation, as well as repairs may be performed by
authorised technical service only and in compliance with the applicable
national law.
NOTE!
The manufacturer disclaims all liability and provides no warranty for
damages, which may be attributed to non-observance of regulations or
incorrect installation.
Place of Installation
•
The appliance is designed to operate in closed rooms and may not be used in
open air nor subject to unfavourable atmospheric conditions.
•
The appliance may be used in properly ventilated room in order to avoid
excessive accumulation of harmful substances in the air.
•
We recommend positioning the appliance under a fume extractor hood or to
remove hot vapours and odours from the thermal processing chamber outside.
•
The surface under the appliance must feature load-bearing capacity suitable for
the appliance's weight with maximum load.
•
Place the appliance on a stable, even, dry surface that features water resistance
and high temperature resistance.
•
The installation place must be easily accessible and sufficiently spacious to
allow easy operation of the appliance.
•
The appliance must be transported to the installation location in packaging, on
its dedicated wooden pallet.
•
Transportation must be executed with the use of pallet trolley, observing all
safety precautions, in order to avoid the risk of tipping it over. Also, following the
operation period, the oven must be transported on a pallet and manipulate with
the highest caution, in order to avoid the risk of tipping it over.
117262
EN
17 / 70
Advertisement
Table of Contents
