Table of Contents
Advertisement
Fig. 23
Copying, Moving, Renaming, and Removing Thermal Processing Program
Each available thermal processing program may be copied, moved, renamed, or
removed fully or partly.
Copying Thermal Processing Program
If a new program is to be created on the basis of an already existing program
(because the old and new program share some thermal processing aspects), it may
be copied.
1. Select the group, in which the thermal processing program is to be saved, and
EN
then enter the name.
2. Press Enter, to confirm.
Fig. 24
44 / 70
The program is unlocked and the required changes
may be introduced.
2. Turn the rotary control knob (19, Fig. 23) to display
the thermal processing phase to be changed.
After making the change you can start thermal
processing directly. In this case, the changes will only
apply to current thermal processing and will not be
saved.
3. You can also create a copy of the program with a
different name which includes the changes made.
3. Select the base thermal processing
program, open it and make changes
by pressing 'Advanced customisation'
(key 18, Fig. 22).
4. Execute the requested change.
5. In 'Functions' menu (20, Fig. 24),
select 'Save', and then 'Copy'.
6. Select the group in which the thermal
processing program is to be saved,
enter its name and press Enter, to
confirm.
Operating Instruction
117262
Advertisement
Table of Contents
