Bartscher Silversteam-K 6110DRS Manual page 58

Activation of EasyService
EasyService function must be activated
before pressing the START key. It is
available only with the appliance in STOP
function.
1. To activate EasyService, set the
EasyService switch (31, Fig. 38) to 'l'
position.
This action allows access to the list of
dishes for Rack Control program.
2. Now, select dishes to be served at the
same time (10 at maximum).
3. Press START key.
After pre-heating (if present) has ended
the appliance requests dishes to be
inserted with a longer thermal processing
time. The cue is an acoustic signal and
'IN' message (Fig. 39) displayed in the
right field. After opening and closing the
door the acoustic signal is reset and the
EN
Countdown begins.
For remaining levels, the time left to
placing dishes in the oven is displayed in
green.
In the same way the appliance signals when other dishes should be put into the
oven. The acoustic signal is generated 15 seconds before the time elapses.
It is recommended to wait until the timer reaches '0' and 'IN' message is displayed
before placing dishes inside. This way all the dishes will be prepared exactly at the
same time.
56 / 70
Operating Instruction
Fig. 38
117262