Table of Contents
Advertisement
Installation Instructions
Drain Connection
•
To provide for liquid drainage from
the thermal processing chamber, the
appliance is equipped with water
drain.
•
The connection (A, Fig. 5) is located
at the back of the appliance, and
features 40 mm diameter.
•
Connect the enclosed PVC
discharge tube to the A connection
and connect it with suitable tube,
which must be routed to a drainage
system.
•
The discharge device is a water trap.
It is recommended, though, to
connect the tube to an open funnel.
•
Check if the water trap is filled with water. Otherwise, fill it with water through the
discharge in the thermal processing chamber.
117262
Fig. 5
EN
21 / 70
Advertisement
Table of Contents
