Cleaning And Maintenance; Safety Advice; Cleaning - Bartscher SNACK A162402E Instruction Manual

6. Cleaning and maintenance

6.1 Safety advice

o Before beginning with repair or cleaning works make sure the device has been
disconnected from power supply and has cooled down.
o Do not use any acid agents and make sure no water ingresses the device.
o To protect yourself from electric shock, never immerse the device, its cables and
the plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets.
Therefore, you must not use any kind of pressure water jet for cleaning the device!

6.2 Cleaning

o The device should be cleaned regularly.
o Pull the power plug before cleaning.
o Let the device cool off.
o The heating element and shield can easily be removed from the oil reservoir, by
removing the switching unit lifting it over the oil reservoir. In this manner the heating
element can easily be washed, as well as the safety shield and oil reservoir.
o Remove the oil reservoir and carefully pour the cooled oil into a collecting tank.
Ensure the tank is stable.
CAUTION!
The switching unit (control panel) must not be washed wet or immersed in water.
Moisture must not get inside the unit. Prior to using, dry all elements of the unit
thoroughly!
o Control panel, surface of the device and power cord should only be wiped off with
a soft cloth and a mild cleaning agent. You must not let water enter the switching
unit. This may lead to dangerous creeping current and malfunctions of the device.
o Do not use any aggressive cleaning agents or abrasive materials as these could
damage the fryer. Clean the device with a mild cleaning liquid. Heavily stained
parts should be left for soaking.
o All parts must be dried thoroughly. Reassemble the parts of device.
o Store the device in a dry place when not using for longer periods. Keep it away from
acid steams and gases.
- 30 -