Washing And Cleaning; Storage; Maintenance Table - Hakki Pilke 38 Pro PTO Instructions Manual

5.8.

Washing and cleaning

Loose debris and sawdust can be cleaned from the machine with pressurised air, for example. The machine
can also be washed with a pressure washer, as long as the water jet is not aimed directly at the bearings or
electrical equipment.
Always ensure that the machine and the working area are sufficiently clean during operation. The machine
must always be cleaned after use. Clean the machine at suitable intervals and always before storing the
machine for a prolonged time. After washing, the machine must be lubricated according to the instructions in
Section 5.5.

6. Storage

Although the machine is intended for outdoor use, it should be covered and stored in a sheltered location or
indoors. Before prolonged storage, the machine must first be cleaned, then washed according to Section 5.8
and lubricated according to Section 5.5.

7. Maintenance table

Item Task
Multiplier gear oil Check
1st change
Subsequent
Hydraulic oil Check
Normal conditions 1st change
Subsequent
Oil filter Always
when
changing oil
All levers Lubrication
Saw blade Sharpen as
necessary
Saw bar Maintenance
as
necessary
Machine Clean
Wash
Electric motor Clean
Electrical Clean
equipment
Winch and strap Check
Hakki Pilke 38 Pro
33 / 40
Daily Interval
100 h
X
X
X
X
X
X
X
X
X
Translation
Interval Substance/access
500 h ory item
SAE 80/90.
0.34 l
X
Amount approx. 65 l
Standard
X ISO VG 32
In hot conditions:
ISO VG
example
13921107005357
spare part: 97348
Lubrication oil
0.325" 68/1.5 mm
spare part: 95668
16" 1.5 mm
spare part: 95147
option:
46, for
Version 3