General Information; Introduction; Purpose Of Use; Machine Models And Basic Information - Hakki Pilke 38 Pro PTO Instructions Manual

1. General information

1.1.

Introduction

The purpose of this manual is to ensure that the machine is used in the manner intended by the
manufacturer, taking safety into consideration. Everyone operating the machine or working in close proximity
to it must study this manual carefully.
Operators of the machine are expected to have basic skills in tractor handling, such as utilising the cardan
shaft drive and the tractor's lifting equipment. Before commencing work, operators must also familiarise
themselves with the machine's control and safety equipment, and ensure their proper operation.
Additional information on Maaselän Kone Oy's products is available on our website at www.hakkipilke.fi.
Keep this manual in the immediate vicinity of the machine.
1.2.

Purpose of use

The Hakki Pilke 38 Pro firewood processor is designed for preparing firewood from pruned wood or logs. The
firewood processor must not be used to process any treated wood, such as is found in construction waste.
Sand, nails or other impurities in the wood may damage the machine.
The maximum diameter of the logs to be processed is 38 cm. This limit must not be exceeded. When
estimating the diameter of the log you are about to cut, note that the shape of the log and other factors, such
as branches and burrs, make the actual diameter larger, and may prevent the log from being fed into the
machine. The splitting channel is designed for logs up to 60 cm in length, which should never be exceeded.
1.3.

Machine models and basic information

Model
Driving power
Weight
TR/Electrical drive
Height/width/length
Infeed/outfeed conveyor
Saw bar/chain
Max log diameter
Max/min length
The machine's serial number, date of manufacture, weight, operating voltage (electrically operated machines)
and model are indicated on the grey type plate located on the machine frame below the locking latch of the
output conveyor, on the right side of the operator.
1.4.

Operating conditions

 The temperature range within which the machine can be operated is -20 to +30 °C. In the winter, the
operator must ensure that there is no risk of slipping in the working area.
 The working area must be level and clear of unnecessary items. No unauthorised persons are allowed
to enter the working area. The machine may only be used in sufficient lighting conditions.
 The machine may not be used indoors.
Hakki Pilke 38 Pro
PTO
Tractor's cardan shaft (PTO)
990 kg
min. 25 hp/max 500 r/min
in the transport position 2,500/2,460/1,300 (mm)
bar: 16" groove 1.5 mm, chain: 68 loops, pitch 0.325"
Firewood max 60 cm; min 22 cm
Translation
4 / 40
PTO
10 kW (min 25 A fuse)
2,200/4,000 (mm)
38 cm
Combi
Electrical
1060 kg
Version 3