Lan Driver Installation (For Kt880E-Gr/Rl Only); 3-6.1 Installation; 3-6.2 Verification - SOLTEK SL-KT880E-GR Manual

3-6 LAN Driver Installation (for KT880E-GR/RL only)

3-6.1 Installation

1. Following the procedures of opening the Support CD, click to "
Onboard LAN Driver" to proceed.
2. Instantly, "The installation is
completed" screen appears,
indicating that LAN Driver
setup is finished.

3-6.2 Verification

1. After LAN Driver setup, a new networking icon will appear at the
corner of the "Start" screen of your system, indicating that a network
channel has been set up.
Chapter 3 Software Setup
49