Other Connectors Configuration; 2-9.1 On-Board Fan Connectors - SOLTEK SL-KT880E-GR Manual

SL-KT880E-GR/RL/R

2-9 Other Connectors Configuration

This section lists out all connectors configurations for users' reference.

2-9.1 On-board FAN Connectors

Mouse JKB1
(on top)
1
RT1
PS/2 Keyboard (underside)
Fan1
USB0
(port)
USB1 (port)
Main Power
+12V Power
RJ45
(on top)
USB2
(port)
1 1
USB3
(port)
1
JAUD1
VIA
VT6122
or
VT6103
AGP 8X/4X
1
CD-In1
VIA
PCI 1
VT1617
PCI 2
RT2
LPC I/O
PCI 3
IT8705
PCI 4
BIOS
PCI 5
Fan2
WOL1
(Optional)
Both Sensor and No-sensor Fan Connectors support CPU/AGP/Sys-
tem/Case cooling fan with +12V mode. A Hardware Monitor chipset is
on board, with which users can install a Hardware Monitor Utility and
read the fan speed transmitted from the sensor fan. Otherwise, users
can read the fan speed from the "Hardware Monitor Status" via BIOS.
A running Fan will send out 2 electric pulses per rotation of its fan
blade. A Sensor Fan Connector will count the electric pulses and send
the information to the System Hardware Monitor which in turn will work
out the fan rotation speed and display it on screen.
1
VIA
KT880
Fan4
IDE2 IDE1
VIA
VT8237
1 1
Fan3
Li
Battery
NJ1
JBAT1
FDD1
Header USB2 Header USB3 1
1 1 1
Sensor
+12V
+12V
GND
GND
Sensor Conn.
No Sensor
FAN1, Sensor Fan Connector
(Yellow)
FAN4, No-sensor Fan Connector
FAN3, Sensor Fan Connector
(Yellow)
FAN2, Sensor Fan Connector
(Yellow)
30
Void