SOLTEK SL-KT880E-GR Manual page 56

4-6.3.1-1 Primary/Secondary IDE Master/Slave
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
Third IDE Master
Fourth IDE Master
Press <Enter> to show the detected information of Primary/Secondary
IDE Master/slave device(s). If any IDE device is detected in any one of
the above items press <Enter> to reveal the IDE information:
Primary/(Secondary) IDE Master/(Slave)
Device : Hard Disk
Vendor : WDC WD400BB-00DEA0
Size : 40.0GB
LBA Mode : Supported
Block Mode : 16Sectors
PIO Mode : 4
Async DMA : MultiWord DMA-2
Ultra DMA : Ultra DMA-5
S.M.A.R.T. : Supported
Type
LBA/Large mode
Block (Multi-Sector Transfer)
PIO Mode
DMA Mode
S.M.A.R.T.
32Bit Data Transfer
Type
To select the types of the IDE devices:
Not Installed;
Auto: Setting type automatically
CD-ROM: ATAPI (Packet Interface) CD-ROM drive
ARMD: ATAPI Removable Media Device
LBA/Large mode
To select or disable LBA/Large mode.
Block (Multi-Sector Transfer)
To select or disable Block Mode. The data transfer from and to the device occurs one
sector or multiple sectors at a time.
PIO Mode
To select or disable PIO Mode.
Choices: Disabled; 1, 2, 3, 4
DMA Mode
To select DMA Mode.
Choices: Auto; SWDMAn; MWDMAn; UDMAn
S.M.A.R.T
Allows you to enable / disable the Self Monitoring Analysis and Reporting Technology for the
hard disk.
32Bit Data Transfer
To auto-select (default) or disable 32Bit Data Transfer.
Primary/(Secondary) IDE Master/(Slave)
Auto
Auto
Auto
Auto
200MHz
Auto
Disabled
59
Chapter 4 BIOS Setup
Hard Disk
ATAPI CDROM
Not Detected
Not Detected
Not Detected
Not Detected
Help Item