Epson S1C17W18 Technical Manual page 356

Code No. Page
413129602 23-3
23-4
23-7
23-9
23-18
24-1
25-1 to 3
AP-A-12, 29
AP-C-3
AP-D-2
23.3 Current Consumption
Current consumption-frequency characteristic in RUN mode (OSC3 operation)
The graph was replaced.
23.4 System Reset Controller (SRC) Characteristics
Reset hold circuit characteristics
Modified the characteristics table.
t : Min. = 0.5 ms, Max. = 0.9 ms
RSTR
23.6 Flash Memory Characteristics
Unless otherwise specified: V
23.9 UART (UART) Characteristics
Modified the characteristics table.
U : Max. = 115,200 bps (V
BRT2
23.15 Temperature Sensor/Reference Voltage Generator (TSRVR) Characteristics
Modified the characteristics table.
t : Condition = "C = 0.1 µF", Typ. = 1.5 ms, Max. = 5 ms
VREFA VREFA
24 Basic External Connection Diagram
V for Flash programming → 2.4 V to 3.6 V
DD
25 Package
Replaced Figure 25.1.
A JEITA name was added to the package name.
Appendix A List of Peripheral Circuit Control Registers
Modified the register tables.
PDIOEN (Pd Port Enable Register)
PDOEN[4:3], [1:0] → PDOEN[4:0]
ADC12_0CTL (ADC12A Ch.0 Control Register)
BSYSTAT: Initial = 1 → 0
Appendix C Mounting Precautions
Added a description.
Treatment of exposed die pad
Appendix D Measures Against Noise
Added a description.
Noise Measures for Input Pins Connected to Signal with High Driving Capability Such As Power
Supply
Contents
= 1.8 to 3.6 V → 2.4 to 3.6 V
DD
= 1.6 to 3.6 V), 57,600 bps (V
DD
REVISION HISTORY
= 1.2 to 1.6 V)
DD