Current Measurement With Socket Adapter; Power Measurement With Socket Adapter - Ahlborn ZED7 00-ABx Instruction Manual

6 Use socket adapter
3. Connect the black connection cable to the black socket (COM) of the
measuring module and the socket of the short-circuit plug, which is plugged
on the socket COM of the socket adapter.
4. Plug the mains plug of the socket adapter into a mains socket and the mains
plug of the consumer into the socket of the socket adapter.
5. Follow the instructions in chapter 5.1 Measure voltage DC with the
ZED7 00-ABx module or in chapter 5.4 Measure voltage AC with the
ZED7 30-ABx module.

6.2 Current measurement with socket adapter

The short-circuit plug is not required.
1. Connect the blue connection cable to the blue socket (A) of the measuring
module and the blue socket (A) of the socket adapter.
2. Connect the black connection cable to the black socket (COM) of the
measuring module and the black socket (COM) of the socket adapter.
3. Plug the mains plug of the socket adapter into a mains socket and the mains
plug of the consumer into the socket of the socket adapter.
4. Follow the instructions in chapter 5.2 Measuring the DC current with the
ZED7 01-ABx module or in chapter 5.5 Measuring the AC current with the
ZED7 31-ABx module.

6.3 Power measurement with socket adapter

The short-circuit plug is not required.
1. Connect the blue connection cable to the blue socket (A) of the measuring
module and the blue socket (A) of the socket adapter.
2. Connect the black connection cable to the black socket (COM) of the
measuring module and the black socket (COM) of the socket adapter.
3. Connect the red connection cable to the red socket (V) of the measuring
module and the red socket (V) of the socket adapter.
- 24 –