Sensor Menu; Configuration On The Pc Via Usb Adapter Cable - Ahlborn ZED7 00-ABx Instruction Manual

4.8 Sensor menu

In order to maintain the future viability of the new ALMEMO
for many years without changing the measuring device, each D7 sensor has an
individual sensor menu that can be called up via each ALMEMO
device. Thus, it is possible to configure measuring ranges or other specific probe
functions. A V7 measuring device or a PC can serve as the operating device.

4.9 Configuration on the PC via USB adapter cable

The ALMEMO D7 sensor is directly connected to the PC with the USB coupling
®
adapter cable ZA1919-AKUV with a baud rate of 115.2 kBd. A microcontroller in
the adapter cable automatically sets the necessary voltage supply as well as baud
rate and device address of the sensor.
D7 sensor
USB adapter cable
ZA1919-AKUV
4 Product
® V7 measuring system
® V7 measuring
- 13 –