Voltage Measurement With The Adaptor Plug; Current Measurement With Adaptor Plug - Ahlborn ALMEMO ZAD 900-AB Series Instruction Manual

6 How to use the adaptor plug

6.1 Voltage measurement with the adaptor plug

1. Plug in the jumper to the sockets A and COM of the adaptor plug.
2. Connect the red connection cable to the red socket (V) of the measuring
module and to the red socket (V) of the adaptor plug.
3. Connect the black connection cable to the black socket (COM) of the
measuring module and to the socket of the jumper that is plugged into the
COM socket of the adaptor plug.
4. Connect the mains plug of the adaptor plug to a wall socket and the mains
plug of the load to the socket of the adaptor plug.
5. Follow the instructions given in chapter 5.1 "How to measure voltage DC
with the module ZAD 900-ABx" respectively in chapter 5.4 "How to measure
current AC with the module ZAD 904-ABx".

6.2 Current measurement with adaptor plug

The jumper is not needed.
1. Connect the blue connection cable to the blue socket (A) of the measuring
module and to the blue socket (A) of the adaptor plug.
2. Connect the black connection cable to the black socket (COM) of the
measuring module and to the black socket (COM) of the adaptor plug.
3. Insert the mains plug of the adaptor plug in a mains wall socket and the
mains plug of the load in the socket of the adaptor plug.
4. Follow the instructions given in chapter 5.2 How to measure current DC with
the module ZAD 901-ABx respectively in chapter 5.4 5.4 How to measure
current AC with the module ZAD 904-ABx.
- 20 –