Table of Contents
Advertisement
6 Use socket adapter
When installing the mains adapter, note that it must be possible to
disconnect it from the mains quickly at any time.
Wire (especially for measuring voltages above 50V) in a voltage-free
condition.
Do not touch exposed parts or connections during operation to avoid
electric shocks.
Use the supplied touch-protected connection cables.
Pay special attention that the current modules are always connected
in series to the consumer, i.e. in a supply line, and must not be
connected directly to the voltage source. When using the socket
adapter, the corresponding sockets of the socket adapter and
measuring module (A-A, V-V, COM-COM) must be connected to each
other. The color of the sockets must be observed here.
Socket V
Socket COM
Socket A
6.1 Voltage measurement with socket adapter
1. Plug the short-circuit plug into sockets A and COM of the socket adapter.
2. Connect the red connection cable to the red socket (V) of the measuring
module and the red socket (V) of the socket adapter.
Socket
Power Plug
Short-circuit Plug
- 23 –
Advertisement
Table of Contents
