Download Print this page

Reset/Power On; Maintenance - Rockwell Automation MultiSight 48MS-SE1PF1-M2 User Manual

Vision sensors

Table of Contents

MultiSight™ User Manual

RESET/Power On

In the opposite figure, MultiSight sensor has evaluated the

object as "bad." Notice that the red LED is on and the hex nut is

missing from the bracket.

RESET/Power On

To reset the MultiSight, pull out the plug or turn off the power supply and then restore power.

Cleaning

Clean the MultiSight with a clean dry cloth. Do not use solvents. Do not use sharp objects. Do not scratch.

10000000877(02)

Table of Contents

Do you have a question about the MultiSight 48MS-SE1PF1-M2 and is the answer not in the manual?