The Inline Controller Under Pc Worx; Software Version; Ip Address; Setting The Real-Time Clock - Phoenix Contact ILC 330 User Manual

3

The Inline Controller Under PC WorX

ILC 330 ETH
ILC 350 ETH
ILC 350 ETH/M
ILC 350 PN
6959_en_05
3.1

Software Version

Using the Inline Controllers requires the following PC WorX version:
PC WorX version 5.10 or later Service Pack 1
(Part of the AUTOMATIONWORX Software Suite 2007 1.30 Service Pack 1)
PC WorX version 3.03 or later
When using PC WorX 3.03 it is necessary to upgrade the data for the ILC 350 ETH from
the "Upgrade ILC 350 ETH" CD. The CD is supplied with the Inline Controller.
Upgrading is not required in later versions.
PC WorX version 3.12 or later Service Pack 1
(Part of the AUTOMATIONWORX Software Suite 2005 1.10)
PC WorX version 5.00 or later
(Part of the AUTOMATIONWORX Software Suite 2006 1.20)
Information on installing and using PC WorX can be found in the quick start guide for the
PC WorX version used. The quick start guide can be downloaded free of charge at
www.phoenixcontact.com
3.2

IP Address

BootP is activated by default upon delivery for communication with the Inline Controller
via Ethernet.
The first setting of the IP address can additionally be carried out with the PC WorX
software manually via the serial interface or by means of a BootP server.
It is possible to change the IP address later via the serial interface or Ethernet using the
PC WorX software.
For setting the IP address using PC WorX, please proceed as explained in the quick start
guide for the PC WorX version used.
3.3

Setting the Real-Time Clock

Set the time and date for the internal system clock of the Inline Controller using the
Controller "Device Details" window in PC WorX.
For setting the real-time clock, please proceed as explained in the quick start guide for
the PC WorX version used.
The Inline Controller Under PC WorX
and is supplied with the software.
3-1
PHOENIX CONTACT