Table of Contents
Advertisement
UM EN ILC 330/350
2-20
PHOENIX CONTACT
2.12
Communication Paths
The communication path to the Inline Controller must be determined before
communication with the Inline Controller can take place.
The following communication paths are available on the Inline Controller:
(A)
Ethernet
10/100Base-T(X)
(B)
PRG
The serial interface (COM 1 to COM 4) of your PC is directly
connected to the Inline Controller.
Figure 2-16
Communication paths: (A) Ethernet (B) PRG
6959_en_05
Advertisement
Table of Contents
