Table of Contents
Advertisement
For the installer
f Place the front cover on the boiler, push it forwards (Fig. 95) and secure it internally at each side using 1 self-tapping
screw – Fig. 96.
Fig. 94
Top covers
Fig. 95
Putting on the front cover and pushing it forwards
f Punch out the cut-out on the rear cover if the flue connection is at the top (Fig. 97) and place the rear cover on the
boiler – Fig. 98.
Fig. 97
Punching out the cut-out on the rear cover if the ue connecti-
on is at the top
PuroWIN PWPE 60
Cut-out for a flue connection that is at the top
Cut-out for a flue connection that is at the top
1 ........... direct feed PuroWIN PWPE 75–100
Fig. 96
Securing the cover internally with 2 screws
Fig. 98
Putting on the rear cover
36
PuroWIN PWPE 75–100
2 x
1
Advertisement
Table of Contents
