Windhager PUROWIN PWPE 60 Installation Instructions Manual page 26

For the installer
f On the right side panel, you will find two flaps at the cleaning opening. Bend them inwards by approximately 90° –
Fig. 47.
Fig. 46 Right side panel
1 ........... Flaps
f emove the cover from control panel 1 – Fig. 48, Fig. 49.
Fig. 48
f Carefully cut out the insulation from the cleaning opening at the bottom – Fig. 50.
Fig. 50 Cutting out the insulation
1
1
Fig. 47 Bending in the two aps at the cleaning opening
Fig. 49
26