Windhager PUROWIN PWPE 60 Installation Instructions Manual page 32

For the installer
f Attach the insulation (Fig. 74) and cladding below the combustion chamber door, making sure that the top notch lines
up with the door mounting (Fig. 75); secure them using 4 self-tapping screws – Fig. 76.
Fig. 73 Insulation and cladding for tting below combustion chamber door
Fig. 74 Attaching the insulation (only at PuroWIN PWPE 60)
Fig. 76 Installing the cladding
(only at PuroWIN PWPE 60)
4 x
Fig. 75 Notch must line up with door mounting
1 ........... Notch
32
1