For the installer
f Hook the cladding on at the bottom and screw it onto the cladding bracket at the front using self-tapping screws
(Fig. 52).
Fig. 51
Hooking on the side panel
f Insert the insulation in the cleaning opening (Fig. 53)
f Install the red knob of the main switch (which can be found in control panel 1), the cleaning cover and the cover for
control panel 1 using self-tapping screws – Fig. 54.
Fig. 53
Inserting the insulation into the cleaning opening
Fig. 52
Attaching the side panel to the cladding bracket with screws
(Illustration PuroWIN PWPE 60)
Fig. 54
Installing the knob of the main switch, the cover for control
panel 1 and the cleaning cover
1 ........... Control panel cover
2 ........... Red knob of main switch
3 ........... Cleaning cover
27
3 x
PuroWIN
PWPE 60
4 x
PuroWIN
PWPE 75–100
4 x
1
2
3
4 x