Windhager PUROWIN PWPE 60 Installation Instructions Manual page 25

For the installer
13.5.3 Installing the right side panel
f Install the door retaining bracket on the bottom right-hand side of the base using 2 M5x12 self-threading TT screws
– Fig. 41.
f Take 2 M5x12 self-threading TT screws (these will be used for hooking on the cladding) and screw them halfway into
the base on the bottom right-hand side – Fig. 41.
2 x
TT M5x12
1
Fig. 41 Screwing on the door retaining bracket, screwing the 2 cladding screws in halfway
1 ........... Door retaining bracket
f Secure the cladding bracket at the bottom using 1 M5x12 self-threading TT screw (Fig. 44) and at the top using 1
self-tapping screw (only at PuroWIN PWPE 60, Fig. 45).
Fig. 42 Cladding bracket
Fig. 44 Securing the cladding bracket at the bottom with a TT screw
Fig. 43
1 ........... Cladding bracket
PuroWIN
PWPE 60
1 x
TT M5x12
PuroWIN
PWPE 75–100
Fig. 45
25
Installing the cladding bracket
Securing the cladding bracket at the top with a self-tapping
screw (only at PuroWIN PWPE 60)
2 x
TT M5x12
1
1 x