Lpr Port Printing Using Tcp/Ip In Windows Nt 4.0 - Panasonic WORKIO DP-CL21 Network Manual

Settings and Printing

LPR Port Printing using TCP/IP in Windows NT 4.0

The following are the steps to set up LPR port printing using the TCP/IP protocol in Windows NT4.0.
Step 1: Setting up TCP/IP on the computer
Step 2: Setting up TCP/IP on the printer
Step 3: Installing the LPR port on the computer
• When printing directly from a computer to the printer, perform steps 3 and 4 on each computer
(Windows NT 4.0).
• When printing through the shared computer (server), perform steps 3 and 4 on the server
computer (Windows NT 4.0), then perform step 5 on each client computer (Windows 95, Windows
98, Windows Me, Windows NT 4.0, Windows 2000 or Windows XP).
Step 4: Setting up the printer driver and the printer port on the computer
Step 5: Setting up the printer driver and printer port on the client computer
■ Step 1: Setting up TCP/IP on the computer
Refer to "Step 1: Setting up TCP/IP on the computer" on page 9
IP in Windows 95 / Windows 98 / Windows
■ Step 2: Setting up TCP/IP on the printer
Refer to "Step 2: Setting up TCP/IP on the printer" on page 10
in Windows 95 / Windows 98 / Windows
Maintenance and Spec.
Me".
Me".
Network
Network
Setup in Windows
in "LPR Port Printing using TCP/
in "LPR Port Printing using TCP/IP
72