Panasonic WORKIO DP-CL21 Network Manual page 15

Settings and Printing
NOTE:
• You cannot search for the printer while the printer is restarting.
• To confirm that the IP Address is set correctly,
(1) On your computer, click [Start], select Programs or All Programs, then click
MS-DOS Prompt. (for Windows 95/Windows 98/Windows Me)
Or
Command Prompt. (for Windows NT 4.0)
Or
Accessories - Command Prompt. (for Windows 2000 / Windows XP)
(2) At the DOS prompt, type ping followed by a space then the printer's IP Address. Then press the
ENTER key.
For example,
ping 172.16.x.x.
If the following notation is displayed, they are set correctly.
Pinging 172.16.x.x with 32 bytes of data:
Reply from 172.16.x.x: bytes=xx time<xxms TTL=xx
Reply from 172.16.x.x: bytes=xx time<xxms TTL=xx
....................................................................................
....................................................................................
If the ping command returns a "Request timed out" message or "Reply from xxx.xxx.xxx.xxx:
Destination host unreachable" message or other error messages you should recheck your settings.
Maintenance and Spec. Network
Network
Setup in Windows
15