Panasonic WORKIO DP-CL21 Network Manual page 96

Settings and Printing
[B] If the printer driver is already installed
Set up the printer port as follows:
1
Click [Start], select Settings and then click Printers.
The Printers window is displayed.
• For Windows XP Professional, click [Start], then click Printers and Faxes.
• For Windows XP Home, click [Start], click Control Panel, click Printers and Other Hardware
icon, then click Printers and Faxes icon.
2
Click your printer with the right mouse button.
3
Click Properties.
4
Click the Ports tab.
5
Click [Add Port...].
6
Click Standard TCP/IP Port from the Available port types list, then click [New
Port...].
The Add Standard TCP /IP Printer Port Wizard window is displayed.
7
Click [Next >].
8
Enter the IP Address or host name of the printer in the Printer Name or IP
Address box, then click [Next >].
9
If the designated printer is set not to use HP JetAdmin (
click [Next >].
10
Click [Finish].
11
Click [Close].
12
Click [Close].
If you need to share the printer port for a client computer, refer to
server computer" on page
NOTE:
• Click on the Start printing after last page is spooled check button in the Advanced tab.
I
• f the check box "Use HP JetAdmin" is enabled within the Network Setup Tool, then the Standard
TCP/IP Port setup is left in the original configuration using the "RAW, port 9100". Only if the check box
is disabled in the Network Setup Tool utility, customization of the port will be required.
Printing using TCP/IP in Windows 2000 or Windows XP" on page
Maintenance and Spec.
97.
Network
Network
Setup in Windows
see page 162
"Sharing the printer port on the
(see "LPR Port
99).
96
),