Setup In Windows; Selecting The Operating System And Protocol; In Windows Nt - Panasonic WORKIO DP-CL21 Network Manual

Settings and Printing

Setup in Windows

This chapter explains how to set up printing in Windows*
Windows NT 4.0, Windows 2000 and Windows XP environment).
First select an Operating System and a network protocol which you are using or want to use, then
select a network printing method
the DP-CL21P or DP-CL21M software, refer to
1
* Microsoft Windows operating system (hereafter Windows)

Selecting the Operating System and Protocol

■ In Windows 95 / Windows 98 / Windows Me
When using the TCP/IP protocol (four types):
• LPR Port printing
• IPP Port printing
• HP JetDirect Port printing
• E-mail Port Printing
When using the IPX/SPX protocol:
When using the NetBEUI protocol:

■ In Windows NT 4.0

When using the TCP/IP protocol (two types):
• LPR Port printing
• HP JetDirect Port printing
• E-mail Port Printing
When using the IPX/SPX protocol:
When using the NetBEUI protocol:
Maintenance and Spec.
(see "Selecting the Printing Method" on page
"Contents of the Printer Software" on page
Network
Network
1
(Windows 95, Windows 98, Windows Me,
(see page 9)
(see page 37)
(see page 49)
(see page 61)
(see page 49)
(see page 49)
(see page 72)
(see page 93)
(see page 61)
(see page 93)
(see page 93)
4
Setup in Windows
6). When installing
7.