Panasonic WORKIO DP-CL21 Network Manual page 140

Settings and Printing
[For Solaris 2.3x - 2.5x]
1
Create Print Queue.
(1) Log in as root.
# login root
(2) Stop print scheduler.
# /usr/sbin/lpshut
(3) Add print server.
Example: Add host name "dpcl21m"
# /usr/sbin/lpsystem -RO -t bsd dpcl21m
(4) Set up print queue.
Example: Add print queue name "dpcl21mlp"
# /usr/sbin/lpadmin -p dpcl21mlp -s dpcl21m!lp
If you use csh, use "\!". "lp" after "!" is the printer queue name.
(5) Start print scheduler.
# /usr/bin/sh /etc/init.d/lp start
(6) Enable print queue.
# /usr/sbin/accept dpcl21mlp
# /usr/bin/enable dpcl21mlp
2
Print
• Print using "lp" command.
# lp -d dpcl21mlp <file name>
Maintenance and Spec. Network
Network
Setup in UNIX
140